Condux Cable Seal Kit

Condux Cable Seal Kit Replacement Cable Seals for the Condux Fiber Optic Cable Blowers are sold in packs of four. These seals work the the appropriate Cable Venturi for the following blower...

Condux Duct Projectiles

Condux Duct Projectiles Flexible rubber cones are durable for many repeated uses. Fast and efficient for long runs with easy pull-back.  

Condux Foam Carriers

Foam Carriers Lightweight carrier easily blows through duct. Best suited for short runs and runs with multiple bends.

Condux Line Carriers

Condux Line Carriers Fast and efficient plastic carriers for fishing with high-speed blowers even in out-of-round duct. Carrier will travel over minor obstructions in duct.  

Condux Underbridge Conduit Support Systems

ENGINEERED TO ORDER Georgia Underground supports the Condux line of Underbridge Conduit Support Systems. Condux is the world’s leading designer and manufacturer of conduit bridge hanger...

Corner Cable Guides

Corner Cable Guides Aluminum sheaves for pulling cable into manholes. 5000 lbs (22,240 N) cable tension load capacity. Support bar sold seperately. Part No. (IN...

CX08045000 Mini Corner Cable Guide

Features two hardened steel rollers that guide steel winch line over sharp edges. It is small but sturdy, allowing for easy handling and set-up along with heavy duty capacities. 10,000 lbs...

CX08220600 PE and PVC Pulling Eyes in Sleeve Size 1.25"

CX08220600 PE and PVC Pulling Eyes in Sleeve Size 1.25" UPC # 781727 39040 Sleeve Covered Pulling Eyes The Condux PE & PVC Pulling Eyes.  The sleeved version are water tight eyes that...

CX08381200 Cable Rack Insulator

Cable Rack Insulator Made of glazed porcelain, insulators rest on the cable rack hooks, providing additional protecion for the cable.   Part Number Groove Radius Groove (A)...

CX08539350 Fiber Optic Quadrant Block

Fiber Optic Quadrant Block Protects fiber optic cable during installation.  Pulling radius of 26" (660mm); 13 aluminum rollers on bronze bearings allow cable to make a gradual 90 degree turn...

CX08539550 Fiber Optic Hanger Block

Fiber Optic Hnager Block Five Aluminum rollers on bronze bearings allow cble to make a gradual 90 degree turn for easy pulling through manhole opening.  Has a pulling radius of 12" [305 mm]...

CX08637800 Undeground Fiber Optic Cable Sheave

Underground Fiber Optic Cable Sheave Specialy designed in cooperation with Alcoa Fujikura Ltd.  for guiding fiber optic or CATV cable safely and efficiently. Condux Cable Sheaves feature an...

CX18100010 Set-up Bracket

CX18100010 Set-Up Bracket A versatile tool that provides a mid-span mount for a 45 Degree Corner Block when a pole is not nearby. The Set-Up Bracket is secured to the strand with a strand clamp,...

CX18105800 Cable Chute

Cable Chute Essentially a Set-Up Bracket with a chute built-in, it creates a path from cable reel to strand. Used in less demanding applications where the reel and strand are aligned, eliminating the...

DISC CARRIER

DISC CARRIER, 1.414'', 1.618", & 2.023

Eye to Eye Connector

Fairlead Quadrant Block

Fairlead Quadrant Block Originally designed to install transpacific fiber optic cable, these quadrant blocks provide a 60" [1,524mm] pulling radius to guide any type of cable.  18 machined...

Figure 8 Swing Link - Condux

Figure 8 Swing Link - Condux CX08580837 - Swing Link 1700lb CX08580850 - Swing Link 6000lb CX08580875 - Swing Link 10,000lb CX08580899 - Swing Link 22,000lb   This figure of 8 Swing Link...

Fixed Head Innerduct Pulling Eye Tang

This pulling eye is often referred to as a carrot. Tapered buttress threads thread into the innerduct for maximum pulling strength. These eyes connect directly to a Condux swivel. When properly...

Hand Hole Hook

The Hand Hole Hook from Condux allows you to easily unlock then hook and pull up to open the Hand Hole. Save time and effort on the job with the Hand Hole Hook from Condux. 

Hanger Arms

Hanger Arms  Allows the hanging of the Fiber Optic Quadrant Block in a manhole for more flexible positioning.   Part Number Description 08539320 Hanger Arm

Heavy Duty Tripod

 Heavy Duty Tripod The Mini-Blower/Pusher mounts easily to the surveyor style tripod, which adds stability and versatility to fiber optic cable installations. Part...

Hitch Mount Adapter LW CableGlider

Hitch Mount Adapter LW CableGlider Hitch Mount Adapters are a fast, easy way to mount the LW CableGlider.  The Hitch Mount Adapter attaches directly into a typical 2" [51 mm] square Reese-type...

Innerduct Eyes for Micro Duct

Innerduct Eyes for Micro Duct Tapered buttress threads into the micro duct for maximum pulling strength.

Innerduct Slitter

Innerduct Slitter           CX08012925 Mechanical Innerduct Slitter is designed to reduce the effort required to longitudinally slit long sections of both High...

Innerduct Slitter & Cable Jacket

Innerduct Slitter & Cable Jacket          CX08013100 The Innerduct Slitter is designed for fast, safe cutting of innerducts from 1" (25 mm) to 2" (51 mm)...

MANDREL,TEST, 1.62 OD (41.1MM) - CX08761383

MANDREL,TEST, 1.62 OD (41.1MM) For 1.50" Innerduct (CX08761383) 08761383       Test Mandrel for 1-1/2" (38 mm) Innerduct   

Micro Duct Packs: Gulfstream 400 & Mini-Blower/Pusher

Micro Duct Packs: Gulfstream 400 & Mini-Blower/Pusher   Duct Size OD (MM) Part Number Duct Clamp Duct Seal Innerduct Eye ID...

Micro Duct Pressure Gauge Kit

Micro Duct Pressure Gauge Kit Use the Micro Duct Pressure Gauge Kit in conjunction with Air Valve Plugs for pressurizing Micro Duct to prevent kinking and crushing during installation. Kit...

Micro Fiber Carrier Kit

 Micro Fiber Carrier Kit Designed to attach to the central strength member (CSM) of the cable. The seals are sized to accommodate the proper ID duct size for maximization of the blowing...

Microduct Cutter

Microduct Cutter The Condux Microduct Cutter is capable of cutting duct ranging from 3m to 18 mm. This cutter is designed specifically to ensure a quick cut, leaving your duct un-crushed and kink...

Microfit Couplers

Condux Microfit Couplers From enterprise projects to fiber to the home our Microfit couplers are a durable, quick connect system that will hold up to all of your installations needs...

Mounting Sockets

Mounting Sockets  The Condux fiber optic cable puller has a square mounting post 2-1/2" (64 mm) x 2-1/2" (64 mm). A female mounting socket is required for stability during cable pulling...

Multiple Strength Rotate Eye Cable Grip

Multiple Strength Grip - Rotating Eye* Multiple Strength Pulling Grips are designed for pulling ACSR, aluminum or copper bare conductor, ground wires, messenger strands, wire rope and insulated...

Nylon Cable Protector

Nylon Cable Protector Flanged, split tube to insert in duct end and protect cable from damage during installation. Also can be left in place for permanent protection.  Part...

PE & PVC Non-Sleeved Pulling Eyes

 PE & PVC Non-Sleeved Pulling Eyes The non-sleeved design provides optimum gripping power, an extremely rigid center rod to prevent bending, and a steal tapered lead cone with the same O.D...

PE & PVC Sleeved Pulling Eyes

Sleeve Covered Pulling Eyes The Condux PE & PVC Pulling Eyes feature three designs to suit your needs. The sleeved version are water tight eyes that feature a multiple O-Ring configuration...

Plug for Winch Line

Plug for Winch Line Venturi plug, used to seal off back of Winch Line Blower to blow in pull tape or pea line.

Pole Mounting Frame

Pole Mounting Frame When overhead fiber optic cable installation applications require the smooth hydraulic power and accurate tension measuring system of the Condux Fiber Optic Cable Puller, the...

Power Dart Blower Accessory Bag

Power Dart Blower Accessory Bag Convient, canvas bag holds Power Dart hose. Inner bag holds Line Carriers, Foam carriers, Seal-off body and Seal-offs.

Power Dart Blower Hose

Power Dart Blower Hose Accessories for Condux Power Dart Blower 08039300    25' x 2-1/2"  08039301

Power Dart Blower Seal-Off

Power Dart Blower Seal-Off Replacement Accessory for the Condux Power Dart Blower

Power Dart Blower Seal-Off Handle

Power Dart Blower Seal-Off Handle Replacement Accessories for the Condux Power Dart Blower Duct Size: 1/2" - 6"

PVC & Polyethylene Cutter

PVC & Polyethylene Cutter Razor sharp cutting blade makes a fast, clean, burr-free cut in PVC and polyethylene. Ratcheting handle provides for sure, steady cutting action. Reduces cutting and...

Ratcheting Cable Cutters

Ratcheting Cable Cutters Easy one or two handed cutting for copper and aluminum power cables. Specially designed tempered blades combine with positive ratcheting action to cut through most...

Remote Mounting Stand

Remote Mounting Stand For fiber optic cable pulling applications that demand flexibility in set-up.  The Remote Mounting Stand allows positioning of the cable puller well away from the power...

Replacement Cones For Duct Projectile

Replacement Cones For Duct Projectile Original equipment replacement cones.

Replacement Sheaves

Replacement Sheaves Part Number Sheave Size Maximum Cable O.D. (A) Min. Bending Radius (B) Max. Sheave Width (C) Maximum Sheave O.D. (D) Shaft Diameter (E) (IN.) (IN.) (IN...

Rope Adapter for Winch Line

Rope Adapter for Winch Line

Shuttle Cable

SHUTTLE CABLE 1.00/1.25 DUCT SHUTTLE CABLE 1.50/2.00 DUCT These unique, flexible shuttles are available in triple parachute configuration, making  rope,  pull  tape   and fiber...

Support Bar

Support Bar Use to support quadrant blocks or cable guides at street level.   Part Number Description 08091440 1 1/4" { 32mm} x 4' {1.2m} steel bar

Swivel Head Innerduct Pulling Eye

Swivel Head Innerduct Pulling Eye The innerduct Pulling Eye is a hybrid tool that combines features from standard innerduct pulling eyes and Condux swivels.  A swivel head prevents twisting and...