Classified as a formed wire design, The FIBERLIGN ADSS Drop Cable Dead-end is able to secure the soft pliable surface of a drop cable without causing attenuation. Unlike wedge type Dead-ends, the formed wire Dead-end effectively transfers the axial load on the cable at the end of the Dead-end legs to a low uniform radial compression near the dead end loop. This transition of force is distributed over the length of the product thus allowing secure holding capability with minimized pressure on the cable or messenger.
FEATURES
FIBERLIGN ADSS Drop Cable Dead-ends -- Round Profile | ||||||
ADSS Drop Dead-end Catalog Number(1) |
Cable Diameter Range(2) | Color Code |
Length Inches |
Units | Wt./Lbs. | |
Inches | mm | Per Carton | ||||
288811285 | 0.251-0.260 | 6.4-6.6 | Red | 18 | 100 | 10 |
288811337 |
0.301-0.310 |
7.6-7.9 | Red | 22 | 100 | 18 |
288811350 | 0.321-0.330 | 8.2-8.4 | Black | 23 | 100 | 20 |
288811274 | 0.351-0.360 | 8.9-9.1 | Black | 24 | 100 | 21 |
288811269 | 0.361-0.370 | 9.2-9.4 | Black | 22 | 100 | 18 |
288811353 | 0.371-0.380 | 9.4-9.6 | Yellow | 27 | v | 27 |
FIBERLIGN ADSS Drop Cable Dead-ends -- Flat Profile | ||||||
ADSS Drop Dead-end Catalog Number(1) |
Cable Diameter Range(2) | Color Code |
Length Inches |
Units | Wt./Lbs. | |
Dimensions(3) L x W Inches (mm) |
Manufacturing | Per Carton | ||||
288811353 | .300 x .172 (8.3 x 4.3) | Corning | Yellow | 27 | 100 | 27 |
.310 x .170 (7.8 x 4.3) | OFS | |||||
.330 x .20 (8.5 x 5.0) | Prysmian |
(1) Add suffix code “T” to Dead-end catalog number to receive P/N 00065474 Thimble. P/N 00065474 is a 1/2" standard thimble - weight is 0.12 lbs. each.
(2) Contact PLP for cable applications not shown
(3) Dimensions L x W represent Length x Width of the Flat Cable Cross-section.
DOCUMENTATION
Application Procedures
SP-2966 (FIBERLIGN ADSS Drop Cable DE)
Catalog Pages
FIBERLIGN ADSS Drop Cable DE - Catalog
Sales Materials
FIBERLIGN ADSS Drop Cable DE & Midspan Drop - Sell Sheet