Created with Sketch. Created with Sketch.

Dielectric Dead-End Accessories

All Dielectric Dead-ends require a proper size and strength Thimble Clevis and may utilize an Extension Link.
To include accessories with Dead-end, add suffix code(s) to Dead-end catalog number.

Thimble Clevis

SKU (Catalog Number) Rated Strength lbs (kN) Minimum Seat Diameter Minimum Groove Diameter
TC-5A
Code C1
12,000 (53) 2-1/4" 7/8"
TC-5F
Code C1
26,900 (119) 2-1/4" 7/8"
ATC-20M
Code C2
20,000 (89) 3" 1-1/2"
TC-6F
Code C4
42,400 (188) 2-1/2" 1-1/16"

Extension Link: An optional 15,000# (67 kN) 14" (356 mm) Extension Link with 5/8" Eye Nut (Cat. #71002366, code E1) is suggested and sometimes recommended by cable suppliers to increase the cable bending radius and reduce stress to the optical fibers at Dead-end locations. This link kit can be used with any type FIBERLIGN Dielectric Dead-end.

For higher loads, use the 25,000# (111 kN), 14" (356 mm) Extension Link (Cat.# LCE-66-14 or P/N 00060132 or code E2).
Loads up to 36,000 pounds can be handled with Cat. No. 000601325 (call GUS for more info).

Banding Bracket: Dielectric Dead-ends can be banded to concrete or steel structures using the 12Klb Banding Bracket Kit (Cat. #710010745, code B1). The kit includes a 5/8"-11x2" long bolt, lock-washer, hex nut and banding bracket. This connects to the Extension Link with 5/8" eye nut referenced above (Cat #71002366). The bracket is rated for 12,000# (53 kN) and should be used with two high strength 1-1/4" steel bands (not supplied).