Created with Sketch. Created with Sketch.

Shop by Category

FIBERLIGN UNI-CLOSURE

The FIBERLIGN UNI-CLOSURE provides an airtight, watertight system that is designed to protect, store, route and organize fibers from unitube or buffer tube cables in any environment.  Whether you are splicing cable above or below ground, the FIBERLIGN UNI-CLOSURE is designed to provide an airtight seal in wet, dry, cold or hot weather.

FEATURES

  • Available in three sizes, 6.5" x 28" (165 x 711 mm), 8.0" x 28" (203 x 711 mm), and 9.5" x 28" (241 x 711 mm)
  • Accommodates 8-16 splice trays, each of which protects, secures, and organizes up to 12 or 18 fiber splices.
  • Splice Trays are also available for protected mass fusion splices, and mass mechanical connectors.
  • The transition tray allows you to store excess fiber for easy fiber count changes in the future.
  • Future Cable Entry with Factory-Installed Cable Entrance Ports
  • LOCKBAR Fastening
  • Transition Tray and Organizer Ensure the Integrity of Fibers

PART TABLES

FIBERLIGN UNI-CLOSURE Ordering Chart
SKU (Catalog Number) Description
8006443 6.5" x 28" (165 x 721) FIBERLIGN UNI-CLOSURE for butt splice applications.
Includes: One Two-Section End Plate, one Three-Section End Plate with two factory-installed cable ports [for future cable entry, cables up to 0.8" (20) diameter], five bonding/ grounding inserts, five “L” brackets for cable shield isolation/strength member tie-off, organizer, transition compartment and transport tubes.
8006450 8.0" x 28" (203 x 721) FIBERLIGN UNI-CLOSURE for butt splice applications.
Includes: one Two-Section End Plate, one Three-Section End Plate with two factory-installed cable ports [for future cable entry, cables up to 0.8" (20) diameter], five bonding/ grounding inserts, five “L” brackets for cable shield isolation/strength member tie-off, organizer, transition compartment and transport tubes.
8006542 9.5" x 28" (241 x 721) FIBERLIGN UNI-CLOSURE for butt splice applications.
Includes: one Two-Section End Plate, one Three-Section End Plate with eight bonding/grounding inserts (no factory-installed cable ports), eight “L” brackets for cable shield isolation/strength member tie-off, organizer, transition compartment and transport tubes.

 

FIBERLIGN UNI-CLOSURE Splice Tray Ordering Chart (mm)
SKU
(Catalog Number)
Splice Tray for: Maximum No. of Trays per Closure Splice Tray
Capacity
6.5" (165) 8.0" (203) 9.5" (241)
8001041 3M Fibrlok
Amp FingerSplice
Siecor CamSplice
Northern Telecom
Lightbridge
8 10 16 12 S
8001085 Protected Mass
Fusion Splice
8 10 16 48 S
8001021 Protected Fusion
Amp Optimate
Norland
8 10 16 12 S
8001044 8 10 16 18 S
8001096 8 10 16 18 A
(A) signifies ADOBE Splice Tray
(S) signifies a standard size thermal-formed splice tray

 

FIBERLIGN UNI-CLOSURE Replacement End Plates and Accessories
SKU (Catalog Number) Description (mm)
8003178 6.5" (165) Diameter Three-Section End Plate with five bonding/grounding inserts, two factory-installed cable ports (for future cable entry, cables up to 0.8" diameter) supplied with five “L” brackets for cable shield isolation/strength member tie-off.
8003175 L-Bracket Bonding Kit (4) bonding brackets and retainer clips
8003176 Transport tube kit [8 tubes, 34" long (863 mm)] for 6.5" x 28" (165 x 711 mm) and 8.0" x 28" (203 x 711 mm) closures.

 

DOCUMENTATION

Application Procedures

SP-2772 (FIBERLIGN UNI-CLOSURE)

Catalog Pages

FIBERLIGN UNI-CLOSURE - Catalog

  • Transport Tube Kit - 34" long - 8003176

    Transport Tube Kit - includes eight tubes, 34" long The FIBERLIGN UNI-CLOSURE provides an airtight, watertight system that is designed to protect, store, route and organize fibers from unitube or buffer tube cables in any environment...

  • FIBERLIGN Uni-Closure Splice Tray 8001085

    FIBERLIGN Uni-Closure Splice Tray 8001085 - Splice Tray for Mass Fusion The FIBERLIGN UNI-CLOSURE provides an airtight, watertight system that is designed to protect, store, route and organize fibers from unitube or buffer tube cables in...

  • "L" Bracket Bonding Kit - 8003175

    Strength Member Bracket Kit, four per kit FIBERLIGN Splice Case Accessories SKU (Catalog Number) Description 8003175 “L” Bracket Bonding Kit – (4) bonding brackets and retainer clips Can also be used...

  • Fiber Safe Splice Tray 8001041

    Splice Trays for all except 8001004 The Splice Trays for all FIBERLIGN Fiber Safe Closures, except the 8001004, are 13" long by 3-15/16" wide (330 x 100 mm), and each is supplied with a snap-on clear cover. There are now two types of splice trays...

  • Fiber Safe Splice Tray 8001096

    The Splice Trays for all FIBERLIGN Fiber Safe Closures, except the 8001004, are 13" long by 3-15/16" wide (330 x 100 mm), and each is supplied with a snap-on clear cover. There are now two types of splice trays offered. The Standard Thermal-formed Tray...

  • Fiber Safe Splice Tray 8001044

    Splice Trays for all except 8001004 The Splice Trays for all FIBERLIGN Fiber Safe Closures, except the 8001004, are 13" long by 3-15/16" wide (330 x 100 mm), and each is supplied with a snap-on clear cover. There are now two types of splice trays...

  • Fiber Safe Splice Tray 8001021

    Splice Trays for all except 8001004 The Splice Trays for all FIBERLIGN Fiber Safe Closures, except the 8001004, are 13" long by 3-15/16" wide (330 x 100 mm), and each is supplied with a snap-on clear cover. There are now two types of splice trays...

  • 9.5" x 28" FIBERLIGN UNI-CLOSER - PLP 8006542

    The FIBERLIGN UNI-CLOSURE provides an airtight, watertight system that is designed to protect, store, route and organize fibers from unitube or buffer tube cables in any environment.  Whether you are splicing cable above or below ground,...

  • 8" x 28" FIBERLIGN UNI-CLOSER (VZ) - PLP 8006450

    The FIBERLIGN UNI-CLOSURE provides an airtight, watertight system that is designed to protect, store, route and organize fibers from unitube or buffer tube cables in any environment.  Whether you are splicing cable above or below ground,...

  • 6.5" x 28" FIBERLIGN UNI-CLOSER (VZ) - PLP 8006443

    The FIBERLIGN UNI-CLOSURE provides an airtight, watertight system that is designed to protect, store, route and organize fibers from unitube or buffer tube cables in any environment.  Whether you are splicing cable above or below ground,...