Created with Sketch. Created with Sketch.

Shop by Category

Pulling Eye

The Pulling Eye is designed to provide a functional and safe way of tensioning down guys at the anchor location. It provides a working load of 3,000 lbs with a 5:1 ratio safety factor (Ultimate strength of 15,000 lbs).

FEATURES
  • Facilitates safe, fast installation of all dead-ends by a pulling point at the anchor
  • Installs around the anchor hardware in seconds
  • Nodular Iron housing and keeper with EHS steel bolt and nut
  • Corrosion resistant powder coating iron
  • Accommodates anchor rods from 1/2" - 1-1/4" (12.7 - 31.75 mm)
  • Reusable
  • Lightweight
PART TABLES
Pulling Eye
SKU (Catalog Number) Description Std. Ctn.
PE-0300 Pulling Eye 4 Units
Replacement Parts
PE-A-0002 Pulling Eye: Keeper As Required
PE-C-0607 Pulling Eye: Nut As Required

NOTE: 3,000 lb. working load is based on a 5 to 1 safety factor.

 
 
DOCUMENTATION

Application Procedures

SP2013 (Pulling Eye)

Catalog Pages

Pulling Eye - Catalog

Sales Materials

Pulling Eye - Sell Sheet

  • Pulling Eye Nut Replacement – PE-C-0607

    Pulling Eye Nut Replacement – PE-C-0607

    The Pulling Eye is designed to provide a functional and safe way of tensioning down guys at the anchor location. It provides a working load of 3,000 lbs with a 5:1 ratio safety factor (Ultimate strength of 15,000 lbs)...

  • Pulling Eye Keeper Replacement – PE-A-0002

    Pulling Eye Keeper Replacement – PE-A-0002

    The Keeper is to be used with 1/2", 5/8", and 3/4" anchor rods. For 1" and 1-1/4" anchor rods, the PREFORMED Pulling Eye is used without the keeper.   The Pulling Eye is designed to provide a functional and safe way of tensioning...

  • Pulling Eye – PLP PE-0300

    Pulling Eye – PLP PE-0300

    The Pulling Eye is designed to provide a functional and safe way of tensioning down guys at the anchor location. It provides a working load of 3,000 lbs with a 5:1 ratio safety factor (Ultimate strength of 15,000 lbs)...