Created with Sketch. Created with Sketch.

Shop by Category

FIBERLIGN Dielectric Support For ADSS

The FIBERLIGN Dielectric Support (FDS) system is designed to gently, but firmly, support All-Dielectric Self-Supporting (ADSS) cable. It is intended for tangent support installations on lines that feature relatively low voltages, short spans and modest mechanical loads.

FEATURES

  • The approximate recommended maximum span lengths for the FDS are:
    • 600' for < 1.00" OD cable (NESC – heavy)
    • 300' for ≥ 1.00" OD cable (NESC – heavy)
  • Body and top are made from a high-strength, engineered dielectric material.  Zine plated bolts with washers secutre the top to the body.
  • Inserts are made from a soft, pliable dielectric material that gently grips the ADSS cable.
  • Threads onto standard 5/8" 11-UNC hot dipped galvanized thru-bolt
  • May be mounted horizontally or vertically
  • May be used as a stringing traveler at the structure on up to 10° line angles (20° in certain cases).
  • All components may be reused as desired if in good condition.
FIBERLIGN Dielectric Support for ADSS
Catalog Number ADSS Cable Range
Complete
Assembly
Min.
(in)
Max.
(in)
Min.
(mm)
Max.
(mm)
44002144 0.275 0.325 7.0 8.3
44000691 0.326 0.375 8.4 9.5
44009998 0.376 0.425 9.6 10.8
44009949 0.426 0.475 10.9 12.1
44009952 0.476 0.525 12.2 13.3
44009823 0.526 0.575 13.4 14.6
44009798 0.576 0.625 14.7 15.9
44009776 0.626 0.675 16.0 17.1
44009799 0.676 0.750 17.2 19.1
44009878 0.751 0.825 19.2 21.0
44009963 0.826 0.900 21.1 22.9
44002213 0.901 0.950 23.0 24.1
44003915 0.951 1.000 24.2 25.4

 

 Quantity 2 Inserts Required per Support

DOCUMENTATION

Application Procedures

SP-2742 (Fiberlign Dielectric Support ADSS)

Catalog Pages

Fiberlign Dielectric Support ADSS - Catalog