Created with Sketch. Created with Sketch.

Shop by Category

FIBERLIGN ADSS Drop Cable Dead-End

Classified as a formed wire design, The FIBERLIGN® ADSS Drop Cable Dead-end is able to secure the soft pliable surface of a drop cable without causing attenuation.  Unlike wedge type Dead-ends, the formed wire Dead-end effectively transfers the axial load on the cable at the end of the Dead-end legs to a low uniform radial compression near the dead end loop. This transition of force is distributed over the length of the product thus allowing secure holding capability with minimized pressure on the cable or messenger.

FEATURES

  • Adapts to all ADSS Drop Designs
    • Round Profile
    • Flat Profile
  • Span Lengths up to 300’ (91.4 m)
    • Drop Applications (Structure to Premise)
  • Easy Installation - No Tools Required
  • Connect to Conventional Fittings
    • Direct Connection to 1.5” (38.1 mm) diameter fitting
    • Thimble used at J-hooks
  • Elevated temperature at 140o F (60o C) tensile test
    • Installation Load typically 100 lbs (45.36 kg)
  • Room temperature tensile test
    • Maximum Rated cable load 250 to 500 lbs (113.4 kg to 226.8 kg)
FIBERLIGN ADSS Drop Cable Dead-ends -- Round Profile
ADSS Drop
Dead-end
Catalog
Number(1)
Cable Diameter Range(2) Color
Code
Length
Inches
Units Wt./Lbs.
Inches mm Per Carton
288811285 0.251-0.260 6.4-6.6 Red 18 100 10
288811337

0.301-0.310

7.6-7.9 Red 22 100 18
288811350 0.321-0.330 8.2-8.4 Black 23 100 20
288811274 0.351-0.360 8.9-9.1 Black 24 100 21
288811269 0.361-0.370 9.2-9.4 Black 22 100 18
288811353 0.371-0.380 9.4-9.6 Yellow 27 v 27

 

FIBERLIGN ADSS Drop Cable Dead-ends -- Flat Profile
ADSS Drop 
Dead-end
Catalog
Number(1)
Cable Diameter Range(2) Color
Code
Length
Inches
Units Wt./Lbs.
Dimensions(3) L x W
Inches (mm)
Manufacturing Per Carton
288811353 .300 x .172 (8.3 x 4.3) Corning Yellow 27 100 27
.310 x .170 (7.8 x 4.3) OFS
.330 x .20 (8.5 x 5.0) Prysmian

 

(1) Add suffix code “T” to Dead-end catalog number to receive P/N 00065474 Thimble. P/N 00065474 is a 1/2" standard thimble - weight is 0.12 lbs. each.
(2) Contact PLP for cable applications not shown
(3) Dimensions L x W represent Length x Width of the Flat Cable Cross-section.

DOCUMENTATION

Application Procedures

SP-2966 (FIBERLIGN ADSS Drop Cable DE)

 

Catalog Pages

FIBERLIGN ADSS Drop Cable DE - Catalog

 

Sales Materials

FIBERLIGN ADSS Drop Cable DE & Midspan Drop - Sell Sheet