Created with Sketch. Created with Sketch.

Shop by Category

PE & PVC Pulling Eyes Sleeved and Non-Sleeved

pe-and-pvc-pulling-eyes-1-.jpg

 

Condux PE and PVC Pulling Eyes provide optimum gripping power and a watertight design. The watertight pulling eyes feature a multiple o-ring configuration, an extremely rigid center rod to prevent bending and a steel tapered lead cone with the same OD as the conduit. These design features protect the outer leading edge of the conduit and form a watertight seal. Condux PE and PVC Pulling Eyes also feature split gripping segments with aggressive gripping threads coupled with a steel expander plug that better grips the full range of conduit IDs.

Installation of the PE and PVC Pulling Eyes simply requires the leading eye to be tightened. The pulling eyes come standard with attachment eyes at both ends for connecting rope or steel lines. Pull-out strengths exceed the tensile capacity of the conduit.

NOTE: PE and PVC Pulling Eyes come with a 90 day limited warranty.

PE and PVC Pulling Eyes Non-Sleeved

pe-and-pvc-pulling-eyes-non-sleeved.jpg

 

      Conduit ID      
Part #
Size (in)
Length (in)
Min.
Max. Lead Cone OD (in)
Duct Type
Nom. Duct ID (In)
08220020

2

8.18 1.88 2.15 2.83 2.0 SDR 11.0 1.92
2.0 SCH80 1.94
2.0 SDR 13.5 2.00
2.0 SDR 15.5 2.05
2.0 SCH 40 2.07
2.0 SDR 17.0 2.08
08220030 3      11.89 2.69 3.13 3.50 3.0 SDR 11.0 2.83
3.0 SCH 80 2.90
3.0 SDR 13.5 2.95
3.0 SDR 15.5 3.02
3.0 SDR 17.0 3.06
3.0 SCH 40 3.07
08220611 4 14.11 3.50 4.20 4.81 4.0 SDR 7.0 4.026
4.0 SDR 9.0 4.026
4.0 SDR 11.5 4.026
4.0 SDR 15.0 4.026
08220050 5 18.45 4.25 5.06 5.56 5.0 SDR 11.0 4.49
5.0 SDR 13.5 4.69
5.0 SDR 15.5 4.80
5.0 SDR 80 4.81
5.0 SDR 17.0 4.87
5.0 SDR 21.0 5.00
5.0 SCH 40 5.05
08220060 6 19.6 5.06 6 6.63 6.0 SDR 11.0 5.35
6.0 SDR 13.5 5.58
6.0 SDR 15.5 5.72
6.0 SCH 80 5.76
6.0 SDR 17.0 5.80
6.0 SDR 21.0 5.96

 

PE and PVC Pulling Eyes in Sleeve

pe-and-pvc-pulling-eyes-sleeved.jpg

      Conduit ID      
Part #
Size (in)
Length (in)
Min.
Max. Lead Cone OD (in)
Duct Type
Nom. Duct ID (In)
08220612

1.00

6.23 1.00 1.25 1.415 1.00 SDR 11.0 1.075
1.00 SDR 13.5 1.121
08220600 1.25  6.23 1.25 1.50 1.76 1.25 SDR 11.0 1.33
1.25 SCH 40 1.38
1.25 SDR 13.5 1.39
1.25 SDR 15.5 1.43
1.25 SDR 17.0 1.44
1.25 SDR 21.0 1.50
 08220602 2 8.18 1.88 2.15 2.45 2.0 SDR 11.0 1.92
2.0 SDR 13.5 2.00
2.0 SDR 15.5 2.05
2.0 SCH 40 2.07
2.0 SDR 17.0 2.08
2.0 SDR 21.0 2.15
 08220609 2.5 8.80   2.31 2.56   3.01 2.5 SDR 11.0 2.32
2.5 SDR 13.5 2.42
2.5 SCH 40 2.47
2.5 SDR 15.5 2.49
2.5 SDR 17.0 2.51
 08220603 3 11.89 2.69 3.13 4.63 3.0 SDR 11.0 2.83
3.0 SDR 13.5 2.95
3.0 SDR 15.5 3.02
3.0 SDR 17.0 3.06
3.0 SCH 40 3.07
 08220604 4 14.11 3.50 4.06 4.63 4,0 SDR 11.0 3.63
4.0 SDR 13.5 3.79
4.0 SCH 80 3.83
4.0 SDR 15.5 3.89
4.0 SDR 17.0 3.94
 4.0 SCH 40 4.03
 4.0 SDR 21.0 4.05
 08220605 5 18.45 4.25 5.06 5.63 5.0 SDR 11.0 4.49
            5.0 SDR 13.5 4.69
            5.0 SDR 15.5 4.80
            5.0 SDR 17.0 4.87
            5.0 SDR 21.0 5.00
            5.0 SCH 40 5.05
08220606 6 19.60 5.06 6.00 6.76  6.0 SDR 11.0 5.35
6.0 SDR 13.5 5.58
6.0 SDR 15.5 5.72
6.0 SDR 17.0 5.80
6.0 SDR 21.0 5.96
 08220608 8 21.53 6.63 7.69 8.84 8.0 SDR 11.0 6.96
8.0 SDR 13.5 7.27
8.0 SDR 15.5 7.45
8.0 SDR 17.0 7.55
  • PE and PVC Pulling Eyes in Sleeve

    PE & PVC Sleeved Pulling Eyes

    Sleeve Covered Pulling Eyes The Condux PE & PVC Pulling Eyes feature three designs to suit your needs. The sleeved version are water tight eyes that feature a multiple O-Ring configuration. These also have an extremely rigid center rod and sleeves...

    $191.50 - $1,522.93
    Choose Options
  • PE and PVC Pulling Eye Non-Sleeved

    PE & PVC Non-Sleeved Pulling Eyes

     PE & PVC Non-Sleeved Pulling Eyes The non-sleeved design provides optimum gripping power, an extremely rigid center rod to prevent bending, and a steal tapered lead cone with the same O.D. as the conduit. The design features split...

    $276.75 - $856.45
    Choose Options